al
external_alarm_mode
xamode
ThermoFlex
The machines with this parameter support an external alarm of the customers.
This parameter sets when the alarm should be activated. The following table
describes which setting does what:
xamode |L |U |E |
0 | - | - | - | 1 | x | - | - | 2 | - | x | - | 3 | x | x | - | 4 | - | - | x | 5 | x | - | x | 6 | - | x | x | 7 | x | x | x |
The columns L, U and E correspond to Load, Unload and Error respectively and indicate during
which states the alarm will be operated. Note that combinations are possible.
Where an x is present the alarm will be active, a - means no alarm.
In each case, the alarm will remain on until either the error is cleared or a sequence is
started.
uint16